10operationFor a comfortable sleep, the air conditioner will operate in Fall asleep Sound sleep Wake up from good’ sleep mode.1. Press the button on the remote controller to select the good’ sleepoperation. indicator appears and off timer indicator starts blinking on the remotecontroller display.2. Press the button repeatedly to set off time You can set the time in half hourly units from 30minute ~ 3hours and hourly unitsfrom 3hour ~ 12hours. The operation hour can be set to minimum 30minutes and maximum 12hours. Default operation hour is set to 8hours.3. Press the Set/Cancel button to active it. Off timer indicator stops blinking and set time will be displayed. If you don’t press Set/Cancel button to start the good’ sleep operation within 10seconds, the operation is canceled so you should check the Off indicator on theremote controller display.1. Fall asleep mode : Provides you with comfortable environment for a good sleep by rapid cooling and hypnagogueexpedition breeze.2. Sound sleep mode : The sound sleep mode adjust temperature and air flow in wave to maintain healthy skintemperature while it aids deep sleep. According to the change of good’ sleep operation hours, thesound sleep hour can be longer or shorter.3. Wake up from mode : Provides you with the air flow that adjusts your body temperature to wake you up ina fresh status.Temperature and fan speed changes in modeYou can set the desired temperature by 1˚C(1˚F) within the range of18˚C~30˚C(65˚F~86˚F).Fan speed will be adjusted automatically according to themode.Air flow direction will be adjusted automatically according to themode.When the air conditioner is on and in cool mode.• The recommended set temperature is 25°C~27°C(77°F~81°F) and 26°C(79°F) is the most ideal temperature.If the set temperature is too low, you may feel cold or dry and catch a cold.• You may not have such a restful sleep if the is set too short or long because the default is set to8-hour-operation.• If the good’ sleep mode is set less than 4hours, the operation will stop after the set hours. If the modeis set over 5 hours, it will run as Wake up stage from the last one hour before it stops automatically.• If you press Turbo, Mode, Quiet button during the good’ sleep operation, the operation is canceledand the selected operation starts.• Only the latest setting timer will be applied between the On Timer/Off Timer and off timer functions.• You can set the S-Plasma ion function during the good’ sleep operation.NOTEPress the Set/Cancel button once again.Cancel