Samsung MX-HS9000 User Manual

Also see for MXHS9000: User manual User manual User manual

03 Functions✎ Only one Bluetooth device can be paired at atime.✎ Once you have turned off the Hi-Fi Componentand the pairing is disconnected, the pairing willnot be restored automatically. To reconnect,you must pair the device again.✎ The Hi-Fi Component system may not searchor connect properly in the following cases:- If there is a strong electrical field around theHi-Fi Component.- If several Bluetooth devices aresimultaneously paired with Hi-Fi Component.- If the Bluetooth device is turned off, not inplace, or malfunctions.- Note that such devices as microwave ovens,wireless LAN adaptors, fluorescent lights,and gas stoves use the same frequencyrange as the Bluetooth device, which cancause electric interference.To disconnect the Bluetooth devicefrom the Hi-Fi ComponentYou can disconnect the Bluetooth device fromthe Hi-Fi Component. For instructions, see theBluetooth device's user manual.• The Hi-Fi Component will be disconnected.• When the Hi-Fi Component is disconnectedfrom the Bluetooth device, the Hi-Fi Componentdisplays DISCONNECTED ; READY on itsdisplay.To disconnect the Hi-Fi Componentfrom the Bluetooth devicePress another mode button on the front panel ofthe Hi-Fi Component to switch from Bluetoothmode to another mode or turn off the Hi-FiComponent. The currently connected device isdisconnected.| NOTES |✎ The connected Bluetooth device will wait acertain amount of time for a response fromthe Hi-Fi Component before terminating theconnection. (Disconnection time may differ,depending on the Bluetooth device)✎ In Bluetooth connection mode, the Bluetoothconnection will be lost if the distance betweenthe Hi-Fi Component and the Bluetooth deviceexceeds 16.25 feet (5 meters).✎ If the Bluetooth device comes back into theeffective range after disconnecting, you canrestart the Hi-Fi Component to restore thepairing with the Bluetooth device.✎ The Hi-Fi Component automatically turns offafter 25 minutes in the Ready mode.✎ When a Bluetooth device is connected to theHi-Fi Component system, the Hi-Fi ComponentSystem automatically switches to the Bluetoothmode if it was in a different mode.Using Bluetooth Power OnWhen the product is turned off, you can connectyour smart device to the product via a Bluetoothconnection to turn it on.1. Press and hold the Bluetooth button onthe remote to set the Bluetooth Power Onfunction On. Bluetooth Power On appearson the display.2. When the product is off, connect your smartdevice to the product via Bluetooth. (Forinformation on Bluetooth connections, referto your smart device’s manual.)3. When the connection is complete, theproduct turns itself on automatically inBluetooth mode.• Select the desired music to play from yoursmart device.| NOTES |✎ Press and hold the Bluetooth button on theremote control to turn the Bluetooth Power Onfunction on or off.Each time you press and hold this button, theHi-Fi Component displays Bluetooth PowerOn ; Off on its display.17 English