Samsung MagicLAN SWL-2100N User Manual

Also see for MagicLAN SWL-2100N: User manual

53You can change ESSID. Be careful to insert exact ESSID to connect AP or wirelessclient. Upper and lower characters are distinguishable. If you use 'ANY' or 'any', yoursystem will try to connect to nearby AP or wireless client randomly.D.2.2. Net Mode(Network Mode)- Infrastructure : is used to connect to network through AP- Ad-hoc : is used to connect wireless client in network without AP. You canconnect to ONLY MagicLAN cards in this mode.- 802.11 Ad-hoc : is used to connect wireless client in network without AP. You canconnect in this mode to wireless LAN cards other than MagicLAN cards that complywith IEEE 802.11b standard.D.2.3. Tx RateYou can choose wireless transmission rate. Default is 'Fully Auto'.D.3. WEP TabYou can use WEP option to encrypt transmission data. After setting WEP values,click 'Write' button, and then PDA needs to power off and on again or to extract thecard and reinsert it. Make sure the WEP keys between AP and wireless client must bethe same to guarantee encrypted transmission.D.3.1. WEP Mode