Installing software over the network575. Using a Network-Connected Machine/p”” or/P””Specifies printer port.Network Port will becreated by use ofStandard TCP/IPPort monitor. Forlocal port, this portmust exist onsystem beforebeing specified bycommand.Printer port name can bespecified as IP address,hostname, USB local portname, IEEE1284 port nameor network path.For example:• /p”xxx.xxx.xxx.xxx” inwhere, “xxx.xxx.xxx.xxx”means IP address fornetwork printer. /p”USB001”, /P”LPT1:”, /p”hostname”, /p"\\computer_name\shared_printer" or"\\xxx.xxx.xxx.xxx\shared_printer" in where,"\\computer_name\shared_printer" or"\\xxx.xxx.xxx.xxx\shared_printer" means thenetwork path to theprinter by entering twoslashes, the computername or local IP addressof the PC sharing theprinter, and then theshare name of theprinter.Command- line Definition Description/a”” or/A””Specifies destination pathfor installation.The destinationpath should be afully qualified path.Since machine driversshould be installed on theOS specific location, thiscommand applies to onlyapplication software./n””or/N”name>”Specifies printer name.Printer instance shall becreated as specified printername.With this parameter, youcan add printer instances asyou wish./nd or/ND Commands not to set theinstalled driver as a defaultmachine driver.It indicates installedmachine driver will not bethe default machine driveron your system if there areone or more printer driversinstalled. If there is noinstalled machine driver onyour system, then thisoption won’t be appliedbecause Windows OS willset installed printer driver asa default machine driver.Command- line Definition Description |
