Upgrading MemoryA memory is installed in the memory slot at the bottom of this computer. The proceduresto replace the memory are described below.Before You Start! Replace new memory only after shutting the computer down completely. Do notreplace memory when the computer is in Sleep mode. Disconnect main power plug and remove the battery before continuing. Only use the same type of memory as specified in the Product Specification.Replacing the Memory1 Remove the screw on the memorycompartment cover at the bottom ofthe computer using a screw driver.2 Pull the memory module latchesoutward. The memory module will popup. Remove the memory module out atan angle of 30 degrees.Fixing Screw