76 Users Manual1. Run Samsung Network Manager when connected to the Internet.2. Select an icon that represents the corresponding location from the Saved Locationswindow and then click Move.3. When the network settings of the selected location are applied, the new locationand the network connection information are displayed in The detailedInformation for window.Sharing Internet AccessThis section describes the procedures to share Internet Access.To share Internet Access, you first have to set a sharing server and a sharing client.When the setup is complete, you can access the Internet from the sharing client byconnecting to the sharing server.Sharing Server : A computer with a direct connection to the internet and alocal network connection.Sharing Client : A computer that uses the Internet by connecting to a sharingserver without itself having a direct connection to the Internet.You can connect a sharing server and a sharing client as follows.(See Figure5 on page (p73))For Connection 3, you have to connect a LAN card in advance.To connect a sharing server and a sharing client using a wired LAN, connectthe computers with a crossover LAN cable or network hub first.To use a wireless LAN, slide the Wireless LAN Latch into the ON position, ifthe wireless LAN is turned off.When the wireless LAN is turned on, the Wireless LAN Operation LED ( )lights up.As an example, Internet sharing procedures for [Connection 1], which connect thesharing server and the Internet through a wired LAN and connect the sharing server andthe sharing client through a wireless LAN, are described below.Sharing Server Sharing ClientExternal Internet Device Client DeviceConnection 1 Wired LAN Wireless LAN Connect a sharing client with theConnection 2 Wireless LAN Wired LAN device that is the same as theConnection 3 Wired LAN Wired LAN client device of the sharing server.
