102 Users Manual3. The description for the standard installation appears. Click Yes.The installation starts, and the system will be restarted after a while.4. After the system has restarted, the message ’Press any key to boot from CD’appears. Do not press any key at this time. After a while the partition configurationscreen appears.To not change the partition, press .What is partition configuration?Partition configuration is a function that devides the hard disk drive into one orseveral partitions. Note that changing the partition deletes all of the data on thehard disk drive.5. Select the desired file system (format).To maintain the current file system, press .What is Format?Format is an operation that initializes the hard disk drive. Since formattingoperation deletes all content on the hard disk drive, use Format with greatcare.6. Select the folder to install the Windows operating system.To delete the previous version of Windows and install in the current folder, press on the keyboard.Note that selecting ’Use another folder to install’ creates a new windows folderand installs Windows in dual boot mode.7. The Windows XP installation wizard appears. Proceed with the installationaccording to the instructions provided by the Windows XP installation wizard.When the installation is completed, the computer will restart.8. After the system has restarted, the message 'Press any key to boot from CD'appears. Do not press any key at this time.The Windows installation has been completed. Remove the system recovery CD, andinsert the system software CD into the CR-ROM drive to install the device drivers andprograms.
