Extended functions 26Tips for getting a clearer photoHolding your camera correctlyHalf-pressing the shutter buttonMake sure nothing isblocking the lens.Make sure nothing isblocking the lens.Half-press [Shutter] and adjust thefocal point. Focus and exposurewill be adjusted automatically or theflash will pop up if necessary.Half-press [Shutter] and adjust thefocal point. Focus and exposurewill be adjusted automatically or theflash will pop up if necessary.The aperture value and shutter speedare automatically set.The aperture value and shutter speedare automatically set.Focus framePress [Shutter] to take the photo ifdisplayed in green.Change the frame and half-press[Shutter] again if displayed in red.••Focus framePress [Shutter] to take the photo ifdisplayed in green.Change the frame and half-press[Shutter] again if displayed in red.••Reducing camera shakeWhen is displayedSet the Optical Image Stabilisation option toreduce camera shake optically. (p. 18)Select the 7 mode to reduce camerashake both optically and digitally. (p. 21)••Set the Optical Image Stabilisation option toreduce camera shake optically. (p. 18)Select the 7 mode to reduce camerashake both optically and digitally. (p. 21)••When shooting in the dark,avoid setting the flash option toSlow Sync or Off. The apertureremains open longer and it maybe harder to hold the camera still.Use a tripod or set the flashoption to Fill in. (p. 33)Set ISO speed options. (p. 35)••When shooting in the dark,avoid setting the flash option toSlow Sync or Off. The apertureremains open longer and it maybe harder to hold the camera still.Use a tripod or set the flashoption to Fill in. (p. 33)Set ISO speed options. (p. 35)••Camera shakeCamera shakeShooting modes