<< 27 >>Using the camera buttons to set the cameraPOWER buttonUsed for turning the camera’s power on / off.If there is no operation during the specifiedtime, the camera’s power will be turned offautomatically to save battery life.Refer to page 72 for more information aboutthe auto power off function.OIS (Optical Image Stabilization) buttonMinimize camera-shake during shooting by pressing the OIS button inShooting Mode.When the Shutter button is pressed halfway down, the shutter speed andaperture will appear in the AMOLED and camera-shake correction will beactivated.The recording mode function can be set up by using the camera buttons.SHUTTER buttonUsed for taking an image or recording voice in the RECORDING mode.● In MOVIE CLIP mode :Pressing the shutter button down fully startsthe process for recording a movie clip.Press the shutter button once and the movieclip is recorded for as long as the availablerecording time in the memory allows. If youwish to stop recording, press the shutter buttonagain.● In STILL IMAGE mode :Pressing the shutter button down halfway activates the autofocus and checksthe condition of the flash. Pressing the shutter button down fully takes andstores the image. If you select voice memo recording, the recording will startafter the camera has finished storing the image data.OIS may not function properly in the following circumstances:- To take pictures of a moving subject- To take pictures with higher digital zoom values- When camera shake is beyond the camera-shake correction range- The slower the shutter speed, the lower the camera-shake correctionperformance.[Before using OIS] [After using OIS]