Ś73śƅ Windows 98/98SE1. Check whether the camera and PC are transferring a file.If the camera status lamp blinks, please wait until the lamp has finishedblinking and is constantly on.2. Unplug the USB cable.ƅ Windows 2000/ME/XP(The illustrations may differ from those shown depending on the Windows O/S.)1. Check whether the camera and PC are transferring a file.If the camera status lamp blinks, please wait until the lamp has finishedblinking and is constantly on.3. The [Unplug or Eject Hardware] window willopen. Select the [USB Mass StorageDevice] and click the [Stop] button.4. The [Stop a Hardware device] window willopen. Select the [USB Mass StorageDevice] and click the [OK] button.2. Double-click the [Unplug or Eject Hardware]icon on the task bar.5. A [Safe to Remove Hardware] window willopen. Click the [OK] button.[Double-click!]Removing the removable diskStarting PC modeƀ We recommend that you should copy the images to the PC to view them.Opening images directly from the removable disk may be subject tounexpected disconnection.ƀ When you upload a file that is not taken by this camera to the RemovableDisk, the [File Error!] message will be displayed on the LCD monitor in thePLAY mode, and nothing is displayed in THUMBNAIL mode.CAUTION7. An image file is transferred from the camerato your PC.6. Press the right mouse button and a pop-upmenu will open. Click [Paste].- By using [Digimax Master], you can see the stored images in the memorydirectly on the PC monitor and you can copy or move the image files.