29Optical Image Stabilization (OIS)When using the optical image stabilization (OIS)function in taking pictures, the user can accuratelyfocus pictures since this function minimizescamera shaking.Using the OIS switch of lensThe OIS function can be used only in the case that the lens in usehas the OIS function.To use this function, please set [OIS] to ON.Using the OIS in the menu optionAfter setting the OIS switch, select the OISfunction in the menu option1 In Shooting mode, press [MENU].2 Select Shooting3 ( 3/ 3) OIS an option.OIS Mode 1 The OIS function is applied only when pressingthe shutter in full or half.OIS Mode 2 The OIS function is always applied.ONOISOFFThe OIS function may not be applied well in the followingUÊcases.When taking a picture while tracing a moving object-When a big vibration occurs beyond the range of-stabilizationWhen the shutter speed is too slow due to a circumstance-like night shootingWhen the battery capacity is not sufficient-When having a close-up shot-When using a tripod, please disable the OIS function sinceUÊthe image can be shaken due to the vibration of OIS function.If the camera is shocked when taking a picture, the displayUÊcan be shaken. In this case, the camera may operatenormally if the camera is powered off and on again.Since the battery consumption can increase along with theUÊuse of OIS function, it is recommended to use the functiononly if needed.To set the OIS function by using the menu, set [UÊ OIS] of lensto ON. This function may not operate depending on the lensmodel.The function can be set directly by pressing [UÊ Fn] in theshooting mode.
