106Connect to external devices > Transfer files to your computerDisconnect the camera (Windows XP)The way to disconnect the USB cable for Windows Vista and 7 issimilar.1 Ensure that no data is being transferred between thecamera and the PC.• If the status lamp on your camera is blinking, it means the datatransfer is in progress. Please wait until the status lamp stopsblinking.2 Click on the tool bar at the bottom right of your PCscreen.3 Click the pop-up message.4 Click the message box indicating safely removed.5 Remove the USB cable.Transfer files to your computer (for Mac)1 Turn off the camera.2 Connect your camera to a Macintosh computer with theUSB cable.Mac OS 10.4 or later is supported.• You must plug the end of the cable with the correct connection pluginto your camera. If the cable is reversed, it may damage your files.The manufacturer is not responsible for any loss of data.• If you try to plug the USB cable into the HDMI port, the camera maynot work properly. If it occurs, restart the camera.3 Turn on the camera.• In the pop-up window, select Computer.4 Double-click the removable disk icon.5 Transfer photos or videos to the computer.
