142Wireless network > Using AllShare Play to send filesViewing photos or videos on devices thatsupport AllShare Play1 Rotate the mode dial to B.2 Select → Nearby devices.• If the guide message appears, select Yes.• The camera will automatically attempt to connect to a WLAN viathe most recently connected AP device.• If the camera has not previously been connected to a WLAN, it willsearch for available AP devices. (p. 123)• You can set to allow only selected devices or all devices to connectby pressing [m], and then selecting DLNA Access Control onthe screen.• A sharing file list is created. Wait until other devices can find yourcamera.3 Connect the AllShare Play device to a network, and then turnon the AllShare Play feature.• Refer to your device's user manual for more information.4 On the camera, allow the AllShare Play device to connect toyour camera.5 On the AllShare Play device, select a camera to connect.6 On the AllShare Play device, browse the shared photos orvideos.• For information about searching for the camera and browsing thephotos or videos on the AllShare Play device, refer to the device'suser manual.• Videos may not play smoothly depending on the type of AllSharePlay device or the network condition. For smooth playback, use a5 Ghz dual-band AP device.APS A camera is connected to a TV that supports AllShare Play via WLAN.
