5. To install the vent mount, find a horizontal vent that is strong enough to hold your NeXusand its cradle. To remove the vent mount, push it into the vent and lift upwards slightly torelease the mount’s hooks from the vent vane.6. Find an unused FM frequency on your car stereo.7. Set your NeXus to the same FM frequency. (Refer to the section marked “Settings,”“FM Frequency.”)8. Tune NeXus to XM channel 1. You should be able to hear XM through your car stereo.Using Your Player AloneUsing Your Player Alone 23ENGivel mount, first find a suitable location. The swivel mount’s adhesive isd may be difficult to remove. Do not install this mount on leather surfacesthe air temperature is at least 60°F (15˚C).nting surface with the surface preparation kit. Peel away the adhesive liners the swivel mount to the surface for 30 seconds. Allow 24 hours beforent.the tension of the mount with a screwdriver.remove the mount, carefully lift the adhesive pad with your fingers or ag with a hair dryer for several minutes will help soften the adhesive.our Player AloneAlones 2/24/06 3:11 PM Page 22