Samsung OfficeServ500 Installation Manual

Also see for OfficeServ500: Programming manual General description

Contents

4-2 Chapter 4Installing Processor and Interface CardsMAIN CONTROL PROCESSOR CARD DAUGHTERBOARDSPosition Type of Daughterboard AllowedLOC1 MFM, SCM, RCM and ESM*LOC2 MFM, SCM, RCMLOC3 MFM, SCM, RCM and MISC* The ESM must be installed in this position in a multiple cabinet (‘L’) system or any system running ‘L’ version softwareNOTE: Only one of any given type of daughterboard may be installed on any one MCP2card (e.g. only one MFM can be installed on one card).DIP Switches on the MCP2 CardON (left) OFF (right)Country Select SW1 Country SelectCountry Select SW2 Country SelectCountry Select SW3 Country SelectCountry Select SW4 Country SelectAuto Program Download Enable SW5 Auto Program Download Disable4 Digit Station Numbers SW6 3 Digit Station Numbers4 Digit Station Groups SW7 3 Digit Station Groups4 Digit Trunk Numbers SW8 3 Digit Trunk NumbersSwitches 1—4 select the country in which the system is installed.Country 1 2 3 4UK OFF ON OFF OFFItaly ON ON OFF OFFAustralia OFF OFF ON OFFHolland OFF ON ON OFFDenmark ON ON ON OFFNew Zealand ON OFF ON OFFKorea OFF OFF OFF OFFUSA ON OFF OFF OFFy Switch 5 selects if Auto Program Download (APD) is enabled. If enabled (ON), a check ismade on the current system software version: if it does not match the SmartMedia cardsoftware version, the SmartMedia version is downloaded to the system.y These DIP switches will not take effect unless set in the required positions and the systemmemory is cleared manually using the Memory Backup switch.