Samsung P10 Manual

Also see for P10: Schematic diagrams Product user manual User manual

Contents

73PictBridge : ResetInitialises user-changed configurations.1. Use the Up / Down buttons to selectthe [Reset] menu tab. And then pressthe Right button.2. Use the Up / Down buttons to selectthe desired sub menu value, and thenpress the OK button.If [No] is selected : Settings will not be reset.If [Yes] is selected : All print and image settings will be reset.Ä Default print setting varies depending on the printer manufacturer.For your printer’s default setting, refer to the user’s guide thatcame with your printer.PICTBRIDGELayout Quality NoReset Type Date Back Set OKFile Name YesImportant notesBe sure to observe the following precautions! This unit contains precision electronic components. Do not use orstore this unit in the following locations.- Areas exposed to severe changes in temperature and humidity.- Areas exposed to dust and dirt.- Areas exposed to direct sunlight or the inside of a vehicle in hotweather.- Environments where there is high magnetism or excessive vibration.- Areas with high explosives or highly flammable materials. Do not leave this camera in places subject to dust, chemicals (likenaphthalene and mothballs), high temperature and high humidity.Keep this camera with silica gel in a hermetically sealed box whennot planning to use the camera for a long period of time Sand can be particularly troublesome to cameras.- Do not let sand get inside the camera when using it on beaches,coastal dunes, or other areas where there is lots of sand.- Doing so may result in failure or may permanently render thecamera unusable. Handling the camera- Never drop the camera or subject it to severe shocks or vibrations.- Protect the large size LCD monitor from an impact. When thiscamera is not used, keep it in the camera case.- Avoid obstructing the lens or the flash when you capture an image.- This camera is not waterproof.To avoid dangerous electrical shocks, never hold or operate thecamera with wet hands.- If you use this camera in wet places, such as beach or pool,do not let water or sand get inside the camera. Doing so mayresult in failure or may permanently damage the unit.