| 
3-5 Using the ProductSetup• To use the Function, must be set to On.When the function is disabled, all the< Anynet+> related operations are deactivated.• Setting an Device to turn Off automatically when the TV is turned off.The active source on the TV remote must be set to TV to use the function.If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If anexternal device is still recording, it may or may not turn off.Device List1. Press the [TOOLS] button. Press the [ ] button to select .2. Press the or button to select , then press the [ ] button.- devices connected to the TV are listed.- If you cannot find a device you want, press the red button to scan for devices.3. Press the or button to select a particular device and press the [ ] button. It is switched to the selected device.- must be set to On in the menu for the menu to appear.Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switchingoperation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically searches the device list when the TV is turned on via the power button, devicesconnected to the TV may not always be automatically displayed in the device list. Press the red button to search for theconnected device.If you have selected external input mode by pressing the [SOURCE] button, you cannot use the function.Make sure to switch to an device by using the . |
