PowerSaverThis PDP Display has a built-in power management system called PowerSaver. This systemsaves energy by switching your PDP Display to low-power mode when it has not been usedfor a certain amount of time. The PDP Display automatically returns to normal operation whenyou press a key on the keyboard. For energy conservation, turn your PDP Display OFF whenit is not needed, or when leaving it unattended for long periods. The PowerSaver systemoperates with a VESA DPM compliant video card installed in your computer. Use the softwareutility installed on your computer to set up this feature.PowerSaver (When used as a Network PDP Display)State Normal Oper-ationPower savingmodePower offEPA/ENERGY2000Power Indicator Green Green, Blink-ingRedPower Consump-tionP50FP 550 W Less than 5wattsLess than 5wattsP63FP 750 WPowerSaver (When used as a normal PDP Display)State Normal Oper-ationPower savingmodePower offEPA/ENERGY2000Power Indicator Green Green, Blink-ingRedPower Consump-tionP50FP 580 W Less than 2wattsLess than 2wattsP63FP 750 WPreset Timing ModesIf the signal transferred from the computer is the same as the following Preset Timing Modes,the screen will be adjusted automatically. However, if the signal differs, the screen may goblank while the power LED is on. Refer to the video card manual and adjusts the screen asfollows.Display Mode HorizontalFrequency(kHz)Vertical Fre-quency (Hz)Pixel Clock(MHz)Sync Polarity(H/V)IBM, 640 x 350 31.469 70.086 25.175 +/-IBM, 640 x 480 31.469 59.940 25.175 -/-IBM, 720 x 400 31.469 70.087 28.322 -/+MAC, 640 x 480 35.000 66.667 30.240 -/-MAC, 832 x 624 49.726 74.551 57.284 -/-MAC, 1152 x 870 68.681 75.062 100.000 -/-VESA, 640 x 480 37.861 72.809 31.500 -/-VESA, 640 x 480 37.500 75.000 31.500 -/-VESA, 800 x 600 35.156 56.250 36.000 +/+Specifications