Samsung PC490-ZC User Manual

16 EnglishBasic Features■ Black Tone (Off / Dark / Darker / Darkest): Select theblack level to adjust the screen depth.■ Dynamic Contrast (Off / Low / Medium / High): Adjustthe screen contrast.■ Gamma: Adjust the primary color intensity.■ Expert Pattern (Off / Pattern1 / Pattern2): Byrunning the Expert Pattern function, the picture canbe calibrated. If the OSD menu disappears or a menuother than the Picture menu is opened, the calibration issaved and the Expert Pattern window disappears.Off: Turns the Expert Pattern function off.Pattern1: This is a test screen designed to demonstratethe affects of display settings on shades.Pattern2: This is a test screen designed to demonstratethe affects of display settings on colors.✎ After selecting Pattern1 or Pattern2, you canadjust any of the advanced settings to the desiredeffect.✎ While the Expert Pattern is running, sound is notoutput.✎ Only enabled in Component and HDMI modes.■ RGB Only Mode (Off / Red / Green / Blue): Displaysthe Red, Green and Blue color for making fineadjustments to the hue and saturation.■ Color Space (Auto / Native / Custom): Adjust therange of colors available to create the image. To adjustColor, Red, Green, Blue and Reset, set Color Spaceto Custom.■ White Balance: Adjust the color temperature for a morenatural picture.R-Offset / G-Offset / B-Offset: Adjust each color’s (red,green, blue) darkness.R-Gain / G-Gain / B-Gain: Adjust each color’s (red,green, blue) brightness.Reset: Resets the White Balance to it’s default settings.■ 10p White Balance (Off / On): Controls the whitebalance in 10 point intervals by adjusting the red, green,and blue brightness.✎ Available when the picture mode is set to Movieand when the external input is set to all input.✎ Some external devices may not support thisfunction.Interval: Select interval to adjust.Red: Adjust the red level.Green: Adjust the green level.Blue: Adjust the blue level.Reset: Resets the 10p White Balance to its defaultsettings.■ Flesh Tone: Emphasize pink “Flesh Tone.”■ Edge Enhancement (Off / On): Emphasize objectboundaries.■ xvYCC (Off / On): Setting the xvYCC mode onincreases detail and color space when watching moviesfrom an external device (e.g. BD/DVD player) connectedto the HDMI or Component IN jacks.✎ Available when the picture mode is set to Movieand when the external input is set to HDMI orComponent.✎ Some external devices may not support thisfunction.Picture OptionsO MENUm → Picture → Picture Options →ENTERE✎ In PC mode, you can only make changes to the ColorTone, Size and Screen Burn Protection.■ Color Tone (Cool / Normal / Warm1 / Warm2)✎ Warm1 or Warm2 will be deactivated when the picturemode is Dynamic or Standard.✎ Settings can be adjusted and stored for each externaldevice connected to an input on the TV.■ Size: Your cable box/satellite receivermay have its own set of screen sizes aswell. However, we highly recommend youuse 16:9 mode most of the time.16:9 : Sets the picture to 16:9 widemode.Zoom1: Use for moderate magnification.Zoom2: Use for a stronger magnification.Wide Fit: Enlarges the aspect ratio of the picture to fitthe entire screen.✎ Available with HD 1080i / 720p signals in 16:9mode.4:3 : Sets the picture to basic (4:3) mode.✎ Do not watch in 4:3 format for a long time. Tracesof borders displayed on the left, right and centerof the screen may cause image retention(screenburn) which are not covered by the warranty.Screen Fit: Displays the full image without any cut-offwhen HDMI (720p / 1080i / 1080p) or Component(1080i / 1080p) signals are inputted.P.SIZEPicture OptionsColor Tone : Normal ►Size : 16:9Digital Noise Filter : AutoMPEG Noise Filter : AutoHDMI Black Level : NormalFilm Mode : OffScreen Burn ProtectionU Move E Enter R Return