● Digital Channel TuningScans for a digital channel.11 Select the New.21 Set the Channel, Frequency, Bandwidth." The Bandwidth function may not be supported depending on the region.31 Select the Search. When scanning has finished, a channel is updated in the channel list.● Analogue Channel TuningScans for a analogue channel.11 Select the New.21 Set the Programme, Colour System, Sound System, Channel and Search.31 Select the Store. When scanning has finished, a channel is updated in the channel list.Channel mode● P (programme mode)When tuning is complete, the broadcasting stations in your area have been assigned to positionnumbers from P0 to P99. You can select a channel by entering the position number in this mode.● C (aerial channel mode) / S (cable channel mode)These two modes allow you to select a channel by entering the assigned number for each aerialbroadcasting station or cable channel.
