Samsung PDP-TELEVISION Owner's Instructions Manual

Also see for PDP-TELEVISION: Owner's instructions Owner's instructions

Contents

English - 271 Press the MENU ( ) button to display the menu.2 Press the … or † button to select Setup, then press the ENTER ( ) button.3 Press the … or † button to select PC, then press the ENTER ( ) button.4 Select the required option by pressing the … or † button, then press theENTER ( ) button.Available options: Image Lock, Position, Auto Adjustment, Image Reset5 When you are satisfied with your setting, press the ENTER ( ) button.6 Press the EXIT button to exit.◆ Image Lock: Coarse/FineThe purpose of picture quality adjustment is to remove or reduce picture noise.If the noise is not removed by Fine-tuning alone, then adjust the frequencyas best as possible (coarse) and Fine-tune again.After the noise has been reduced, re-adjust the picture so that it is alignedon the center of screen.1 Press the … or † button to select Coarse or Fine, then press theENTER ( ) button.2 Press the œ or √ button to adjust the screen quality, vertical stripes mayappear or the picture may be blurry. Press the ENTER ( ) button.◆ Position:Adjust the PC’s screen positioning if it does not fit the TV screen.1 Adjust the position by pressing the …/†/œ/√ button.2 Press the ENTER ( ) button.◆ Auto Adjustment:Auto adjustment allows the PC screen of set to self-adjust to the incomingPC video signal.The values of fine, coarse and position are adjusted automatically.◆ Image Reset:You can replace all image settings with the factory default values.➢ You can select these options simply by pressing the PC button on theremote control.➢ Preset to the PC mode by pressing the SOURCE ( ) button.Setting the PCSetupMove Enter ReturnPlug & PlayLanguage : EnglishTimeGame Mode : OffBlue Screen : OffMelody : OffPCMoreTVPCMove Enter ReturnImage LockPositionAuto AdjustmentImage ResetTVImage LockMove Enter ReturnCoarse 50Fine 0TVPositionMove Enter ReturnTVImage Reset has completed.ReturnAuto Adjustment in progressPlease wait