Samsung PL43E400U1F Service Manual

4. Troubleshooting• Method of Color Calibration (HDMI)1) Apply the 720p Lattice (N0. 6) pattern signal to the HDMI1/DVI IN port.2) Press the Source key to switch to “HDMI1” mode.3) Enter Service mode.4) Select the “ADC” menu.5) Select the “HDMI Calibration” menu.6) In “HDMI Calibration Off” status, press the “ ” key to perform Calibration.7) When Calibration is complete, it returns to the high-level menu.8) You can see the change of the “HDMI Calibration” status from Failure to Success.■ White Balance - AdjustmentADC / WB - White BalanceFactory (Low light) (High light)Sub BrightR offsetG offsetB offsetSub ContrastR gainG gainB gainCopyright© 1995-2012 SAMSUNG. All rights reserved. 4-42