Samsung PM32F-BC Quick Setup Manual

Also see for PM32F-BC: Quick setup guide User manual User manual User manual Quick setup guide

Quick Setup GuidePM32F-BC PM43F-BC* The colour and the appearance may differ depending on the product, and the specifications are subjectto change without prior notice to improve the performance.* Recommended hours of use per day for the PM32F-BC model is less than 16 hours.If the product is used for longer than 16 hours a day, the warranty may be void.* Download the user manual from the website for further details.http://www.samsung.com/displaysolutionsThe terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo aretrademarks or registered trademarks of HDMI Licensing LLC in the United States and othercountries. BN68-08926D-01Checking the ComponentsContact the vendor where you purchased the product if any components are missing.++--Quick Setup Guide Warranty card (Not available in somelocations)Power cord Batteries (Not available in some locations)USB cable Remote Control RS232C(IN) adapter Screw ((M3 x L8) x 1)Ring-type holder* x 4 USB cover* Use the provided Ring-type holder (HOLDER-WALL RING, BN61-14912A) to install the PM32F-BC model on the wall.Troubleshooting GuideReverse SideDVI/PC/MAGICINFO INHDMI2USB1(1.0A)RS232COUTRS232CINUSB2(0.5A)AUDIOINHDMI1AUDIOOUTRJ45DP IN DAISY CHAINTOUCH OUTSCREENTOUCH OUTPC3 5 6 84 7 9 10 111 21 Connect to a USB port on the product to use the touch function.2 Connect to a PC to use the touch function.3 Connect to a USB memory device.4 Connects to MDC using an RS232C adapter.5 Receives sound from a source device via an audio cable.6 Connects to the audio of a source device.7 Connects to a source device using an HDMI cable.8 DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.PC IN: Use the (dedicated) D-SUB - DVI cable (or D-SUB cable with D-SUB to DVIadapter) when connecting a PC.MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box(sold separately).9 Connects to a source device using a DP cable.10 Connects to another product using a daisy chain (DP port) cable.11 Connects to MDC using a LAN cable.Issues SolutionsThe screen keeps switchingon and off.Check the cable connection between the productand PC, and ensure the connection is secure.No Signal is displayed on thescreen.Check that the product is connected correctly witha cable.Check that the device connected to the product ispowered on.Not Optimum Mode isdisplayed.This message is displayed when a signal from thegraphics card exceeds the product’s maximumresolution and frequency.Refer to the Standard Signal Mode Table and setthe maximum resolution and frequency accordingto the product specifications.The images on the screenlook distorted. Check the cable connection to the product.The screen is not clear.The screen is blurry.Adjust Coarse and Fine.Remove any accessories (video extension cable,etc) and try again.Set the resolution and frequency to therecommended level.The screen appears unstableand shaky.Check that the resolution and frequency of thePC and graphics card are set within a rangecompatible with the product. Then, change thescreen settings if required by referring to theAdditional Information on the product menu andthe Standard Signal Mode Table.There are shadows or ghostimages left on the screen.Issues SolutionsThe screen is too bright.The screen is too dark. Adjust Brightness and Contrast.Screen color is inconsistent. Go to Picture and adjust the Color Space settings.White does not really lookwhite. Go to Picture and adjust the White Balance settings.There is no sound.Check the connection of the audio cable or adjustthe volume.Check the volume.The volume is too low.Adjust the volume.If the volume is still low after turning it up to themaximum level, adjust the volume on your PCsound card or software program.The remote control does notwork.Make sure that the batteries are correctly in place(+/-).Check if the batteries are flat.Check for power failure.Make sure that the power cord is connected.Check for any special lighting or neon signsswitched on in the vicinity.

/ 2

Related manuals for Samsung PM32F-BC