Samsung PN42B400P3DXZA Owner's Manual And Installation

Also see for PN42B400P3D: Manual User manual Quick setup guide

[] Connectingto a Cable Box that DescramblesSome Channelsif your cable box descrambles only some channels (such as premium channels), follow the instructions below. Youwill need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at mostelectronics stores.)1. Find and disconnect the cable that isconnected to the ANT IN terminal on yourcable box.This terminal might be labeled "ANT IN","VHF IN" or simply, "IN"."fA"TI"2. Connect this cable to a two-way splitter.Incomingcable Splitter3. Connect an Antenna cable between theOUTPUT terminal on the splitter and the INterminal on the cable box.Incomingcable Splitter _=====IN _ our /====,j_JCable Box4. Connect an Antenna cable between the ANTOUT terminal on the cable box and the B-INterminal on the RF(A/B) switch. IncomingcableSplitter RF (AIB)Cable Box Switch6. Connect another cable between the otherOUT terminal on the splitter and the A-INterminal on the RF (A/B) switch.6. Connect the last Antenna cable between theOUT terminal on the RF (A/B) switch and theANT IN terminal on the rear of the TV.Incoming IN CABLE OUTk ) RF (NB)Cable Box SwitchI ..... Splitter L _ RF (fflB)SwitchAfter you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" positionto view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel,which is usually channel 3 or 4.)