Samsung PN42C430 User Manual

Also see for Digimax 430: User manual User manual Quick start guide

Contents

27English04 Advanced FeaturesAnynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionView TV Changes Anynet+ mode to TV broadcast mode.Device List Shows the Anynet+ device list.(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu ofthe DVD recorder will appear.(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, theplay menu of the DVD recorder will appear.Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices thatsupport the recording function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*device_name).¦ Setting Up Anynet+O MENUm → Application → Anynet+ (HDMI-CEC) → ENTERE■ SetupAnynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.✎ If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.However, a device may not turn off if recording is in progress.✎ May not be enabled depending on the device.¦ Switching between Anynet+ Devices1. Anynet+ devices connected to the TV are listed.✎ If you cannot find a device you want, press the Red button to refresh the list.2. Select a device and press the ENTERE button. You can switch to the selected device.✎ The Device List to On menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application menu.x Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switchingoperation.x If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.Make sure to switch to an Anynet+ device by using the Device List.¦ RecordingYou can make a recording of a TV Program using a Samsung recorder.1. Select Recording.✎ When there are more than two recording devicesx When multiple recording devices are connected, the recording devices are listed. Select one recording device inthe Device List.✎ When the recording device is not displayed, select Device List and press the Red button to search devices.2. Press the EXIT button to exit.✎ You can record the source streams by selecting Recording: (device_name).✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video fromanother device, the video from the device is recorded.✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properlyconnect an antenna to a recording device, refer to the recording device’s users manual.