Samsung PN43E450A1F User Manual

Also see for PN43E450: User manual Product information

Contents

- 3 -Input Source Picture SizeATV, AV, Component (480i, 480p) 16:9, Zoom1,Zoom2, 4:3DTV (1080i, 1080p), Component (1080i,1080p), HDMI (720p, 1080i, 1080p)16:9, Wide Fit,4:3, Screen Fit■■ Digital Noise Filter (Off / Low / Medium / High / Auto) : If thebroadcast signal received by your TV is weak, you can activatethe Digital Noise Filter feature to reduce any static and ghostingthat may appear on the screen.✎ When the signal is weak, try all the Digital Noise Filteroptions until the TV displays the best picture.■■ HDMI Black Level (Normal / Low) : For HDMI signals, selectthe black level to adjust the screen depth. Low make blacks lookdarker.✎ Available only in HDMI mode (RGB signals).■■ Film Mode (Off / Auto) : Sets the TV to automatically sense andprocess film signals from all sources and adjusts the picture foroptimum quality.✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i /1080i) and HDMI (480i / 1080i).■■ Screen Burn Protection : To reduce the possibility of screenburn, this unit is equipped with Pixel Shift screen burn preventiontechnology. Pixel Shift moves the picture slightly on the screen.The Time function setting allows you to program the timebetween movement of the picture in minutes.x Pixel Shift (Off / On) : Using this function, you can set the TVto move pixels minutely on the PDP screen in a horizontal orvertical direction to minimize after images on the screen.Available Pixel Shift Settings and Optimum SettingsAvailable Settings Optimum SettingsHorizontal 0~4 (pixels) 4Vertical 0~4 (pixels) 4Time(minute) 1~4 min 4 min✎ The Pixel Shift value may differ depending on themonitor size (inches) and mode.✎ This function is not available in the Screen Fit mode.Your TV also has the following additional screen burnprotection functions:x Scrolling: This function removes after-images on the screenby illuminating all the pixels on the PDP according to a pattern.Use this function when there are after images or symbols onthe screen, especially when you displayed a still image on thescreen for a long time.✎ The after-image removal function has to run a long time(approximately 1 hour) to remove after-images on thescreen effectively. If the after-image is not removed afteryou run the function, run the function again.✎ Press any key on the remote control to cancel thisfeature.x Side Gray (Dark/Light): Lets you select the color of thesidebars your TV displays when you set the screen size to 4:3.■■ Picture Reset (Reset Picture Mode/Cancel): Resets thepicture settings to their factory defaults.Sound MenuMode t■■ Standard: Selects the normal sound mode.■■ Music: Emphasizes music over voices.■■ Movie: Provides the best sound for movies.■■ Clear Voice: Emphasizes voices over other sounds.■■ Amplify: Increase the intensity of high-frequency sounds to allowa better listening experience for the hearing impaired.EqualizerAvailable in Standard sound mode only.■■ Balance L/R: Adjusts the balance between the right and leftspeaker.■■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (BandwidthAdjustment): Adjusts the loudness of specific bandwidthfrequencies.■■ Reset: Resets the equalizer to its default settings.SRS TruSurround HD (On/Off)Available in Standard sound mode only.SRS TruSurround HD is a patented SRS technology that solvesthe problem of playing 5.1 multichannel content through twospeakers. TruSurround delivers a compelling, virtual surroundsound experience through any two-speaker playback system,including internal television speakers. It is fully compatible with allmultichannel formats.Preferred LanguageDigital channels only.Digital-TV broadcasts can transmit many audio trackssimultaneously (for example, simultaneous translations of a programinto foreign languages).✎ You can only select a language from among the ones beingbroadcast.Multi-Track Sound (MTS)Analog channels only.■■ Mono: Select for channels that are broadcasting in mono or ifyou are having difficulty receiving a stereo signal.■■ Stereo: Select for channels that are broadcasting in stereo.■■ SAP: Select to listen to the Separate Audio Program, which isusually a foreign-language translation.✎ Depending on the program being broadcast, you can listen toMono, Stereo or SAP.Auto VolumeBecause each station has its own broadcasting conditions, thevolume may fluctuate each time you change the channel. Thisfeature automatically adjusts the volume of a channel by loweringthe sound output when the modulation signal is high or by raisingthe sound output when the modulation signal is low.SPDIF OutputThe SPDIF (Sony Philips Digital InterFace) outputs anuncompressed digital audio signal when you connect the digitalaudio jack on the back of the TV to a digital audio in jack on areceiver or home theater.■■ Audio Format (PCM/Dolby Digital): You can select the DigitalAudio output (SPDIF) format. The available Digital Audio outputformat may differ depending on the input source.