Samsung PN50A410C1D Quick Setup Manual

Also see for PN42A410: User guide

Contents

English - 0Use to select TV or other external input sources such as DVDplayers or Set-top/Cable boxes connected to the TV.Use to select the input source of your choice.To Select the Source1 Press the MENU button.Press the ▲ or ▼ button to select Input, then pressthe ENTER button.2 Press the ENTER button again to select SourceList. Press the ▲ or ▼ button to select signalsource, then press the ENTER button.➢ Available signal sources: TV,AV, AV2,S-Video, Component, Component2, PC,HDMI, HDMI2➢ You can choose only those external devicesthat are connected to the TV.Your television has several setting options that allow you tocontrol the picture quality.1 To select the desired picture mode, follow the“Changing the Picture Standard” instructions number1 to 2.2 Press the ▲ or ▼ button to select Cell Light,Contrast, Brightness, Sharpness, Color, or Tint,then press the ENTER button.● Cell Light: Selects the brightness of PDP Cell Light.● Contrast: Adjusts the contrast level of the picture.● Brightness: Adjusts the brightness level of thepicture.● Sharpness: Adjusts the edge definition of thepicture.● Color: Adjusts color saturation of the picture.● Tint(G/R): Adjusts the color tint of the picture bycompensating the red and green color.Source List : TV ►Edit Name ►InputT VEnterMove ReturnTVAV1 : - - - -AV2 : - - - -S-Video : - - - -Component1 : - - - -Component2 : - - - -PC : - - - -▼ MoreSource ListT VEnterMove ReturnYou can select the type of picture which best corresponds toyour viewing requirements.1 Press the MENU button to display the menu.Press the ENTER button to select Picture.2 Press the ENTER button to select Mode.Press the ▲ or ▼ button to select Dynamic,Standard, or Movie.Press the ENTER button.● Dynamic: Select the picture for high-definition ina bright room.● Standard: Select the picture for the optimumdisplay in a normal environment.● Movie: Select the picture for viewing movies in adark room.Picture ControlChanging the Picture StandardCustomizing the Picture Settings3 Press the ◄ or ► button to decrease or increase thevalue of a particular item. Press the ENTER button.Press the EXIT button to exit.➢ When you make changes to Cell Light, Contrast,Brightness, Sharpness, Color, or Tint(G/R) theOSD will be adjusted accordingly.➢ When in PC mode, Tint(G/R), Sharpness andColor are not available.➢ Each adjusted setting will be stored separatelyaccording to its input mode.Contrast 100Move Adjust ReturnCell Light 10Move Adjust ReturnMode :Cell Light 7Contrast 95Brightness 45Sharpness 50Color 50Tint(G/R) G 50 R 50▼ MorePictureT VEnterMove ReturnDynamicStandardMovieMode : Standard ►Cell Light 7Contrast 95Brightness 45Sharpness 50Color 50Tint(G/R) G 50 R 50▼ MorePictureT VEnterMove Return