Samsung PN50C550G1FXZA User Manual

Also see for PN50C540: Quick setup guide User manual User manual User manual Manual Del Usuario

22 EnglishBasic FeaturesSLEEP✎ When Speaker Select is set to TV Speakerx TV Speaker: On, External Speaker: On✎ If there is no video signal, both speakers will be mute.SPDIF OutputSPDIF (Sony Philips Digital Interface) is used to provide digitalsound, reducing interference going to speakers and variousdigital devices such as an A/V Receiver/Home theater.■ Audio Format: During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF) format from the options PCM or Dolby Digital.■ Audio Delay: Correct audio-video sync problems, whenwatching TV or video, and when listening to digital audiooutput using an external device such as an AV receiver(0ms ~ 250ms).Sound Reset (OK / Cancel)Reset all sound settings to the factory defaults.Setup Menu¦ Setting the TimeO MENUm → Setup → Time → ENTERETime■ Clock: Setting the clock is for using various timerfeatures of the TV.O The current time will appear every time you pressthe INFO button.✎ If you disconnect the power cord, you have to setthe clock again.Clock Mode (Auto / Manual)− Auto: Set the current time automatically using thetime from a digital channel.✎ The antenna must be connected in order to setthe time automatically.− Manual: Set the current time manually.✎ Depending on the broadcast station and signal,the auto time set up may not be correct. In thiscase, set the time manually.Clock Set: Set the Month, Day, Year, Hour, Minute andam/pm manually.✎ Available only when Clock Mode is set toManual.✎ You can set the Month, Day, Year, Hour, andMinute directly by pressing the number buttonson the remote control.DST (Daylight Saving Time) (Off / On): Switches theDaylight Saving Time function on or off.✎ This function is only available when the ClockMode is set to Auto.Time Zone: Select your time zone.✎ This function is only available when the ClockMode is set to Auto.¦ Using the Sleep TimerO MENUm → Setup → Time → Sleep Timer →ENTERE■ Sleep Timer t: Automaticallyshuts off the TV after a preset periodof time (30, 60, 90, 120, 150 and 180minutes).✎ To cancel the Sleep Timer, selectOff.¦ Setting the On / Off TimerO MENUm → Setup → Time → Timer 1→ ENTEREYou can set the TV to turn on automatically at a preset time.■ Timer 1 / Timer 2 / Timer 3: Three different on / offtimer settings can be made. You must set the clock first.10 TV Cable 100 am000000 am▲▼Timer 1On TimeOff TimeVolumeInactivateInactivateSun Mon Tue Wed Thu Fri SatOnceSource Antenna ChannelRepeatL Move U Adjust E Enter R Return