Samsung PN50C6400 User Manual

Also see for PN50C6400: Available Apps User manual User manual User manual User manual

27English04 Advanced Features¦ Connecting to a Wireless NetworkTo connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustrationbelow.Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsungrecommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.✎ NOTE You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wirelessnetwork. Samsung’s Wireless LAN adapter is sold separately. The Samsung Wireless LAN adapter is offered by selectretailers, Ecommerce sites and Samsungparts.com. To use a wireless network, your TV must connect wirelessly to a wireless IP sharer (either a router or a modem). If thewireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. Samsung’s Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you playthe video over IEEE 802.11B/G connection, the video may not be played smoothly. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP shareris currently being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed blow, it will not work with the TV. If you select the Pure High-throughput (Greenfield) 802.11n mode and set your AP's Security Encryption type to WEP,TKIP or TKIPAES (WPS2Mixed), your Samsung TV will not support the connection in compliance with new Wi-Ficertification specifications. When connecting Samsung Wireless LAN Adapter to TV in 802.11N mode, WEP/TKIP/TKIP-AES is not supported. If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push ButtonConfiguration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key ineither mode. If your router, modem, or device isn’t certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.” Connection Methods: You can setup the wireless network connection six ways.– Samsung Auto Configuration - For non-Samsung devices.– PBC (WPS)– Auto Setup (Using the Auto Network Search function)– Manual Setup– SWL (Samsung Wireless Link) - For Samsung devices only.– Ad-HocTV Rear PanelThe LAN Port onthe WallLAN Cable(Not Supplied)Wireless IP Sharer(AP having DHCP server)Samsung WirelessLAN Adapteror✎ To use the SWL (Samsung Wireless Link) function, connect to the USB 1 (HDD) port.