Samsung PPM42H3 Owner's Instructions Manual

Also see for PPM 42H3: Brochure & specs Specifications

Contents

10ENGInstalling the Display on the Wall Attachment PanelWall Mount BracketMounting KitsPlastic Hanger x 4 Screws x 4How to Adjust Mounting Angle1 Secure the PDP to the wall mount bracket.(Please refer to the following instructions.)2 Set the angle by pulling the upper end of thePDP attached to bracket in the direction of thearrow.3 The angle can be adjusted from 0° to 20° by±2°.The wall mount bracket is deliveredseparately. Please tighten the captivescrew in the direction of the arrow afterassembling the bracket.☛ This wall mount bracket installation guide is for the WMN4230 model. This installation guide may bedifferent from the PDP User’s manual. Please refer to the proper installation guide for your product.Installation Notes◆ Do not install the PDP on any place other than vertical walls.◆ To protect the performance of the PDP and prevent troubles, avoid the followings:- Do not install next to smoke and fire detectors.- Do not install in an area subjected to vibration or high voltage.- Do not install near or around any heating apparatus.◆ Use only recommended parts and components.◆ Do not install the PDP vertically.