Samsung PPM42S2 Owner's Instructions Manual

Selecting a Menu Language6362Setting the Multi Control1 Press the Menu button. Move the joystick up ordown to select “SETUP”, then press the joystickto enter.2 Move the joystick up or down to select the“Language”.3 Move the joystick left or right to select the appropri-ate language: English, Spanish, or French.4 Press the Menu button to exit.Multi ControlDigital NRAuto Power OnPanel LockLanguageOffOffOffEnglishMulti ControlDigital NRAuto Power OnPanel LockLanguageOffOffOffEnglish1 Press the Menu button. Move the joystick up ordown to select “SETUP”, then press the joystickto enter.2 Press the joystick to enter.3 Enter ID setup number. The ID Setup operates byusing only the joystick.4 Move the joystick up or down to select “ID Input”,The ID Input operates by using only thenumeric buttons.5 Enter ID Input and the screen with the set ID numberwill be switched to the Menu screen.Note• To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. Whenentering the ID Input number of PDP1 while the PDP is set in the ID Input mode, only PDP1 isswitched to the Menu screen and you can operate the remocon. At this time, PDP2 doesn't operatewith the remocon and displays the standby mode of ID Input. (See the figure of step 4.)Multi ControlDigital NRAuto Power OnPanel LockLanguageOffOffOffEnglishMulti ControlDigital NRAuto Power OnPanel LockLanguageOffOffOffEnglishID Setup 0 1ID Input _ _ID Setup 0 1ID Input 0 -