Samsung PPM42S3 Owner's Instructions Manual

Also see for PPM 50H3: Install guide Specifications Owner's instructions Service manual

Contents

BN68-00457B-01ENG 2003.10.23 3:21 PM Page 32Protecting the Screen BurningYou can prevent the residual image of the PDP.1 Press the MENU button.Result: The main menu is displayed.2 Press the A or T button to select Setup.Result: The options available in the Setup group are displayed.3 Press the _" button.4 Pressthe _,or T buttonto selectBurningProtection.5 Press the !_ button.Result: The Burning Protection menu is displayed withthe #ixel Shift selected.5 Press the _" button again.Result: The #ixel Shift menu is displayed with the Setselected.You can also do simply by pressing the &EFFECT button.7 Set to On by pressing the _1 or 1_ button for making the screenmove per regular hour and preventing the residual image.8 Select the option (Horizontal Dot, Vertical Line, Time) to beadjusted by pressing the _ or _' button. Press the _ or !_ buttonto reach the required setting.Optimum condition for pixel shift;PPM42S3 PPM50/63H3Horizontal Dot 2 4Vertical Line 4 4Time 4MIN 4MIN9 When you are satisfied with the settings, press the MENU button.Result: The Burning Protection menu is displayed again.10 Press the A or T button to select Signal Pattern. Set to On bypressing the _ or !_ button for removing the residual image.11 Press the ,& or T button to select All White. Set to On bypressing the _1or 1_ button for removing the residual image aftermaking the screen white.]he Signal Pattern and All W1_itefeature areeffective after working for a long time.