Samsung PROXPRESS M332 SERIES User Manual

Also see for PROXPRESS M332 SERIES: Quick installation guide User guide Service manual User guide User manual

Media and tray452. Menu Overview and Basic SetupPreprinted paperWhen loading preprinted paper, the printed side should be facing up with anuncurled edge at the front. If you experience problems with paper feeding, turnthe paper around. Note that print quality is not guaranteed.• Must be printed with heat-resistant ink that will not melt, vaporize, orrelease hazardous emissions when subjected to the machine’s fusingtemperature for 0.1 second (about 170°C (338°F)).• Preprinted paper ink must be non-flammable and should not adverselyaffect machine rollers.• Before you load preprinted paper, verify that the ink on the paper is dry.During the fusing process, wet ink can come off preprinted paper, reducingprint quality.Glossy Photo• Recommended media: Glossy paper (Letter) for this machine by HPBrochure Paper (Product: Q6611A) only.• Recommended media: Glossy paper (A4) for this machine by HP SuperiorPaper 160 glossy (Product: Q6616A).5Setting the paper size and typeAfter loading paper in the paper tray, set the paper size and type using thecontrol panel buttons.• You can set the machine’s settings by using the Device Settings in6DPVXQJ(DV\3ULQWHU0DQDJHUprogram.- For Windows and Mac users, you set from Samsung Easy PrinterManager! (Switch to advanced mode)!Device Settings,see "Device Settings" on page 239.• It may be necessary to press OK to navigate to lower-level menus forsome models.1 Select (Menu) button on the control panel.2 Press Paper and select the tray you want.3 Press Paper Size or Paper Type.