Samsung PS-42C430 User Manual

Also see for PS-42C430: User manual Quick start guide User manual

12 EnglishBasic Features■ Screen Burn Protection: To reduce the possibility ofscreen burn, this unit is equipped with screen burnprevention technology. The Time setting allows you toprogramme the time between movement of the picturein minutes.Pixel Shift (Off / On): Using this function, you canminutely move pixels on the PDP in horizontal or verticaldirection to minimize after image on the screen.✎ Optimum condition for pixel shiftItem TV/AV/Component/HDMI/PCHorizontal 0~4 4Vertical 0~4 4Time (minute) 1~4 min 4 min✎ The Pixel Shift value may differ depending on themonitor size (inches) and mode.✎ This function is not available in the Screen Fitmode.Scrolling: This function removes after-images on thescreen by moving all the pixels on the PDP accordingto a pattern. Use this function when there are remainingafter images or symbols on the screen, especially whenyou displayed a still image on the screen for a long time.✎ The after-image removal function has to beexecuted for a long time (approximately 1 hour)to effectively remove after-images on the screen.If the after-image is not removed after performingthe function, repeat the function again.✎ Press any key on the remote control to cancel thisfeature.Side Grey (Dark / Light): When you watch TV with thescreen ratio set to 4:3, the screen is prevented from anydamage by adjusting the white balance on both extremeleft and right sides.Reset (OK / Cancel)Resets your current picture mode to its default settings.¦ Setting up the TV with Your PCSet the input source to PC.Auto Adjustment tAdjust frequency values/positions and fine tune the settingsautomatically.✎ Not available when connecting with an HDMI/DVI cable.Screen■ Coarse / Fine: Removes or reduces picture noise. If thenoise is not removed by Fine-tuning alone, then adjustthe frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjustthe picture so that it is aligned to the centre of screen.■ PC Position: Adjust the PC screen position withdirection button (▲ / ▼ / ◄ / ►).■ Image Reset: Resets the image to default settings.Using Your TV as a Computer (PC) DisplaySetting Up Your PC Software (Based on Windows XP)Depending on the version of Windows and the video card,the actual screens on your PC may differ in which case thesame basic set-up information will almost always be applied.(If not, contact your computer manufacturer or SamsungDealer.)1. Click on “Control Panel” on the Windows start menu.2. Click on “Appearance and Themes” in the “ControlPanel” window and a display dialog-box will appear.3. Click on “Display” and a display dialog box will appear.4. Navigate to the “Settings” tab on the display dialog-box.y The correct size setting (resolution)[Optimum: 42" : 1024 X 768 / 50" : 1360 X 768 pixels]y If a vertical-frequency option exists on your displaysettings dialog box, the correct value is “60” or “60 Hz.”Otherwise, just click “OK” and exit the dialog box.Sound Menu¦ Changing the Preset Sound ModeMode■ Standard: Selects the normal sound mode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound for movies.■ Clear Voice: Emphasizes voices over other sounds.■ Custom: Increase the intensity of high-frequency soundto allow a better listening experience for the hearingimpaired.¦ Adjusting Sound SettingsEqualizerAdjusts the sound mode.■ Balance L/R: Adjusts the balance between the right andleft speaker.■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (BandwidthAdjustment): Adjusts the level of specific bandwidthfrequencies.