Samsung PS-42C67HD Owner's Instructions Manual

Contents

English - 29Screen Burn ProtectionTo reduce the possibility of screen burn, this unit is equippedwith screen burn prevention technology. This technologyenables you to set picture movement up/down (Vertical Line)and side to side (Horizontal Dot). The Time setting allowsyou to program the time between movement of the picture inminutes.1 Press the MENU button to display the menu.2 Press the ▲ or ▼ button to select Setup, then press theENTER/OK button.3 Press the ▲ or ▼ button to select Screen Burn Protection,then press the ENTER/OK button.4 Select the required option by pressing the ▲ or ▼ button, thenpress the ENTER/OK button.Available options: Pixel Shift, All White, Signal Pattern, SideGray5 When you are satisfied with your setting, press the ENTER/OKbutton.6 Press the EXIT button to exit. Pixel Shift: Using this function, you can minutely move pixelson the PDP in horizontal or vertical direction to minimize afterimage on the screen.− Set Pixel Shift to On by pressing the ▲ or ▼ button, thenpress the ENTER/OK button.− Select the required option by pressing the ▲ or ▼ button,then press the ENTER/OK button.Available options: Horizontal Dot, Vertical Line, Time➢ Optimum condition for pixel shift;PC TV/Ext/Component/HDMI/DTVHorizontal Dot 1 2Vertical Line 1 2Time (minute) 2 min 2 min➢ The Pixel Shift value may differ depending on the monitor size (inches) and mode. All White: This function helps remove after images on the screen by changing the colour of pixels towhite. Use this function when there are remaining after images or symbols on the screen especiallywhen you displayed a still image on the screen for a long time. Signal Pattern: This function helps remove after images on the screen by moving all the pixels onthe PDP according to a pattern. Use this function when there are remaining after images or symbolson the screen especially when you displayed a still image on the screen for a long time. Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from anydamage by adjusting the white balance on both extreme left and right sides.Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.Light: When you set the screen ratio to 4:3, it brightens the left and right sides.➢ To remove after images on the screen, use either All White or Signal Pattern function. Althoughboth of the two functions remove after images on the screen, Signal Pattern is more effective.➢ The after image removal function has to be executed for a long time (approximately 1 hour) toeffectively remove after images on the screen. If after image is not improved after the execution of thefunction, repeat the function again.➢ Press any button on the remote control to cancel this feature.Move Enter ReturnPixel Shift All White Signal Pattern Side Gray : Dark Screen Burn ProtectionT VMove Enter ReturnPixel Shift : On Horizontal Dot : 2 Vertical Line : 2 Time : 2 Pixel ShiftT VMove Enter Return MoreHDMI Black Level : Low PIP Screen Burn Protection SetupT V