English - 101 Press the MENU ( ) button to display the menu.2 Press the ENTER ( ) button to select Source List.3 Press the ENTER ( ) button again.4 Press the … or † button to select the signal source, then press theENTER ( ) button.Available signal source: TV, Ext.1, Ext.2, AV, S-Video, Component,PC, HDMI➢ You can select these options simply by pressing the SOURCE buttonon the remote control.➢ You can enter TV or PC mode directly by using the TV or PC button on theremote control unit.Viewing an External Signal SourceYou can switch between viewing signal from connected equipment, such as aVCR, DVD, Set-Top Box, and the TV source (broadcast or cable).You can give a name to the external source.1 Press the MENU ( ) button to display the menu.2 Press the ENTER ( ) button.3 Press the … or † button to select Edit Name, then press theENTER ( ) button.4 Press the … or † button to select the external source to be edited, thenpress the ENTER ( ) button.5 Select the required device by pressing … or †, then press the ENTER ( )button.Available device names: VCR, DVD, D-VHS, Cable STB, HD STB,Satellite STB, AV Receiver, DVD Receiver, Game, Camcorder,DVD Combo, DHR (DVD HDD Recorder), or PC.6 Press the EXIT button to exit.Editing Device NamesInputMove Enter ReturnSource List : TVEdit NameTVInputMove Enter ReturnSource List : TVEdit NameTVSource ListMove Enter ReturnTVExt.1 : ----Ext.2 : ----AV : ----S-Video : ----Component : ----PC : ----HDMI : ----TVEdit NameMove Enter ReturnExt.1 : -----Ext.2 : -----AV : -----S-Video : -----Component : -----PC : -----HDMI : -----TV- - - -VCRDVDD-VHSCable STB