Samsung PS-42C96HC Owner's Instructions Manual

Contents

English - 37Operating the DTV MenuViewing the DTV MenuAfter installing your antenna system and TV with appropriate connectors. Plug in the AC main power and switch on the TV. Press the D.MENU button to bring up the DTV menu.The main menu appears on the screen. Its left side has four icons: Guide, Channel, Setup, andLanguage.1. ChannelThis menu consists of 4 sub-menus:Auto Store, Manual Store, Edit Favourite Channels, andChannel List. Press the ▲ or ▼ button to select Channel, then press theENTER/OK button. The Channel menu is displayed.1.1 Auto StoreYou can update the channel list when the broadcaster adds newservices or if you move the TV to a new location. Press the ENTER/OK button to select Auto Store.Press the ▲ or ▼ button to select Auto, Cable or Aerial.Press the ENTER/OK button.− Auto: Scans channels automatically.− Cable: Scans cable channels.− Aerial: Scans aerial channels.➢ This product cannot scan both cable and aerialchannels at the same time.➢ When it has finished, the number of scanned serviceswill be displayed.➢ The existing favourite channel list will not be deletedwhen the channel list is updated.➢ To stop the scan before it has finished, press theENTER/OK button with STOP selected. Press the exIt button to exit.➢ If the signal status is poor, No service found! Check theaerial connection. message is displayed.1.2 Manual StoreYou can specify the channel for a fast channel search. Press the ▲ or ▼ button to select Manual Store, thenpress the ENTER/OK button. Press the ▲ or ▼ button to select Cable, then press theENTER/OK button.− Frequency: Displays the frequency for the channel.(Differs in each country)− Modulation: Displays available modulation values.− Symbol rate: Displays available symbol rates. Press the ▲ or ▼ button to select Aerial, then press theENTER/OK button.− Channel: Channel 21 to 68 in sequence are displayed(depending on the country)− Frequency: The frequency available in the Channelgroup is displayed.− Bandwidth: The available bandwidths are 7 and 8 MHz. Press the red button to start the scan for digital services.When it has finished, channels are updated in the channellist.➢ You can input by pressing the button on the remote control.➢ You can not change only frequency and when changing achannel the Frequency will be automatically changed.Continued...Auto Store Manual Store Edit Favourite Channels Channel List ChannelMove Enter ReturnAuto StoreReturn0%Services found: 0 Frequency: -StartAuto Cable Aerial Auto StoreMove Enter ReturnChoose system to scanCable Aerial Manual StoreMove Enter ReturnChoose system to scanChannel Frequency Bandwidth5 177500 KHz 7 MHzManual StoreAdjust ReturnSearchManual Store.. Enter freq. Move ReturnSearchFrequencyModulationSymbol rate11400064QAM6900KHzkS/s