Samsung PS-42P7HD Owner's Instructions Manual

Also see for PS-42P7HD: Service manual

Contents

English - 60Instructions on Securing the SET to the Wall Mount Bracket➢ The exterior of the SET may be different than the picture. (Assembly and installation of the plastic hanger isthe same.)1 Remove the screws from the back of the PDP. 2 Use the screw and assemble the plastic hanger.(Please refer to the following picture.)☛ 1 Please ask the installers to install the wallmount bracket.2 Please be sure to check if the plastic hanger iscompletely secured on both the left and rightside after hanging the SET on the wall mountbracket.3 Please avoid catching your fingers whileinstalling and adjusting the angle.4 Please tightly secure the wall mount bracket tothe wall to avoid injury from a falling SET.How to Install the Wall Mount Bracket3 Tighten the screws of the plastic hanger (shownin picture 2) to the back side of the PDP.4 Remove the Safety Pins. Fasten the 4 plasticlatches assembled at step (#) on the back side ofthe PDP using the guide holes of the wall mount,push (!) and hook (@) down to secure the PDP onthe wall mount as illustrated. Secure the PDP byinserting the Safety Pins, not to fall from the wallmount.continued...PDP panelWall attachmentpanel bracketWall