Samsung PS42B450B1W User Manual

Also see for PS42B450B1W: Manual Quick setup guide

38 English Anynet+Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devicesconnected to the TV.Option DescriptionView TV Anynet+ mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.(device_name) MENU Shows the connected device menus.E.g. If a DVD recorder is connected, the disc menu of theDVD recorder will appear.(device_name) INFO Shows the play menu of the connected device.E.g. If a DVD recorder is connected, the play menu of theDVD recorder will appear.Record: (*recorder) Starts recording immediately using the recorder.(This is only available for devices that support therecording function.)(*recorder) ReserveRecordingEnables reserving a recording for the recorder. (This is onlyavailable for devices that support the recording reservationfunction.)Stop Recording:(*recorder)Stops recording.Receiver Sound is played through the receiver.TV Remote Control Buttons Available in Anynet+ ModeDevice Type Operating Status Available ButtonsAnynet+ DeviceAfter switching to the device,when the menu of thecorresponding device is displayedon the screen.Numeric buttons▲/▼/◄/►/ENTEREbuttonsColour buttons / EXIT buttonAfter switching to the device,while playing a file(Backward search) /(Forward search) /(Stop) /(Play) /(Pause)Device with built-inTunerAfter switching to the device,when you are watching a TVprogramme P / buttonAudio Device When Receiver is activated = / buttonM MUTE buttonThe Anynet+ function only works when the active source on the TV remote control is set■to TV.The■ button works only while in the recordable state.You cannot control Anynet+ devices using the buttons on the TV. You can control■Anynet+ devices only using the TV remote control.The TV remote control may not work under certain conditions. In this case, reselect the■Anynet+ device.The Anynet+ functions do not operate with other manufacturers’ products.■The■ , operations may differ depending on the device.If more than one recording■device is connected, theyare displayed as (*recorder)and if only one recordingdevice is connected, it willbe represented as (*device_name).