Samsung PS42B451B2W User Manual

Also see for PS42B451B2W: Manual Quick setup guide Quick setup guide Service manual

English - 30Continued...Setting Up Anynet+Press the TOOLS button to display Tools menu.You can also display Anynet+ menu by selecting Tools → Anynet+(HDMI-CEC).TSetupAnynet+(��MI-CEC) → �� / �nTo use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ relatedoperations are deactivated.Auto Turn �� → Yes / NoSetting an Anynet+ Device to turn Off Automatically when the TV is Turned OffThe active source on the TV remote must be set to TV to use the Anynet+ function.If you set Auto Turn Off to Yes, connected external devices are also turned off whenthe TV is turned off. If an external device is still recording, it may or may not turn off.❑NNNScanning and Switching between Anynet+ Devices1. Press the TOOLS button. Press the ENTERE button to selectAnynet+ (HDMI-CEC).. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.Anynet+ devices connected to the TV are listed. If you cannot find a device you want,press the red button to scan for devices.Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device Listmenu appears.3. Press the ▲ or ▼ button to select to a particular device and press the ENTERE button.It is switched to the selected device.Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TVwhen the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for theconnected device.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure toswitch to an Anynet+ device by using the Device List.NNNNNNNApplicationAnynet+ (HDMI-CEC) ►Device ListSetupU Move E Enter R ReturnAnynet+ (HDMI-CEC) : ONAuto Turn Off : YesU Move E Enter R ReturnSetupOffOnView TVDevice ListRecord : DVDRDVDR MENUDVDR INFOReceiver OnSetupU Move L Adjust R Return