Samsung PS50A552S1R User Manual
Also see for PS50A550: User manualUser manual
                                                     | |
Contents
|
English - 0Picture OptionsYou can set detailed picture settings.1 Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Picture Options, thenpress the ENTER button.4 Select the required option by pressing the ▲ or ▼ button,then press the ENTER button.5 When you are satisfied with your setting, press theENTER button. Press the EXIT button to exit.➢ In PC mode, you can only make changes to the Colour Tone,Size and Screen Burn Protection from among the items inPicture Options. Colour Tone: Cool/Cool1/Normal/Warm1/Warm➢ When the picture mode is set to Dynamic or Standard,Warm1 and Warm cannot be selected. Size: Auto Wide/1:/Wide Zoom/Zoom/4:/Just ScanYou can select the picture size which best corresponds to yourviewing requirements.− Auto Wide: Expanding and pulling up the picture from 4:3 to16:9 ratio.− 1:: Sets the picture to 16:9 wide mode.− Wide Zoom: Magnify the size of the picture more than 4:3.Move the screen up/down using the ▲ or ▼ button afterselecting the by pressing the ► or ENTER button.− Zoom: Magnify the size of the picture vertically on screen.− 4:: Sets the picture to 4:3 normal mode.− Just Scan: Use this function to see the full imagewithout any cutoff when HDMI(720p/1080i/1080p) orComponent(1080i/1080p) signals are input.After selecting Just Scan in HDMI (100i/100p) orComponent (100i/100p) mode: Press the ◄ or ► buttonto select , then press the ENTER button. Press the ▲, ▼, ◄ or ► button to move the pictureup, down, left and right.Reset: Press the ◄ or ► button to select Reset, then press the ENTER button. You can initializethe setting.➢ With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut offor a specific colour appears on the screen.➢ For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)connection of 50 and 60Hz, only the input source is supported.➢ You can change the picture size simply by pressing the P.SIZE button on the remote control.➢ Depending on the input source, the picture size options may vary.➢ The items available may differ depending on the selected mode.➢ When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.➢ In PC Mode, only "16:9" and "4:3" mode can be adjusted.Continued... Flesh Tone:-15~+15You can emphasize the pink tone in the picture.Press the ◄ or ► button until you reach the optimal setting.➢ Changing the adjustment value will refresh the adjusted screen. Edge Enhancement: Off/OnYou can emphasize object boundaries. xvYCC: Off/OnSetting the xvYCC mode to On increases detail and colour space when watching movies from anexternal device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set thePicture Mode to Movie to enjoy this feature.➢ The xvYCC function works only in Component or HDMI(Y, Cb, Cr) mode.Move Enter ReturnAuto Wide1:Wide ZoomZoom4:Just ScanSizeT VMove Enter ExitMode : Standard Cell Light Contrast 0Brightness 45Sharpness 50Colour 50Tint G50 R50Detailed Settings MorePictureT VMove Enter ReturnColour Tone : Normal Size : Auto Wide Screen Mode : 1: Digital NR : Auto DNle : On HDMI Black Level : Normal Movie Plus : Low Blue only mode : Off Screen Burn Protection Picture OptionsT V |
Related manuals for Samsung PS50A550
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine