English - 44. SystemThis menu consists of 4 sub-menus:Product Information, Signal Information, SoftwareUpgrade, and Reset.− Product InformationYou can view your product information. For service or repair,please contact a Samsung approved dealer. Press the ENTER button with Product Informationselected. The product information menu is displayed.− Software Version / Firmware Version− Signal InformationYou can get information about the signal status. Press the ENTER button with Signal Informationselected. The technical information for signal status isdisplayed.− Service / Service ID / Multiplex / Network / Biterror level / Signal Strength− Software Upgrade (Option)To keep your product up-to-date with new digital televisionfeatures then software upgrades are periodically broadcastas part of the normal television signal. It will automaticallydetect these signals and display the software upgradebanner. You are given the option to install the upgrade. Software InforamtionPress the ENTER button, then the current softwareversion is shown. To display the software versioninformation, press the ENTER button again. Manual UpgradePress the ENTER button to search for new softwarefrom the currently broadcasting channels. Standby Mode Upgrade : On / OffPress the ENTER button. To continue software upgradewith master power on, Select On by pressing the ▲ or▼ button.45 minutes after entering standby mode, a manualupgrade is automatically conducted. Since the powerof the unit is turned on internally, the screen may beon slightly for the PDP product. This phenomenonmay continue for more than 1 hour until the softwareupgrade is completed.− ResetYou can reset the values stored to the factory default values. The Reset operation deletes all channel informationand user preferences returning all values to their defaultfactory state. Press the ENTER button with Reset selected.The Enter PIN is displayed. Enter your current 4-digit PIN code by using thenumeric buttons (0~9). The warning message isdisplayed. All values will be reset by pressing thecoloured buttons (red, green, yellow, and blue) in turn. The default PIN of a new TV set is “0-0-0-0”. When PIN is changed in Child Lock, the PIN forresetting automatically changes. When reset is complete, it operates DTV Plug & Play(DTV Auto Store, Time Zone-depending on the country,Time Setting) and exits from the digital TV mode without changing to the analog TV mode.(Refer to page 10~11)System SetupMove Enter ReturnDTVProduct Information Signal Information Software Upgrade Reset SystemMove Enter ReturnDTVSoftware Version: T-JSMDEUC-1001Firmware Version: T-EMMADEUB-010Product InformationReturnDTVService: ?Service ID: 0000Multiplex: ? (TSID 0000,ONID 0000)Network: ? (ID 0000)Bit error level: 10Signal Strength: 0Signal InformationReturnDTVSoftware Information Manual Upgrade Standby Mode Upgrade : On Software UpgradeMove Enter ReturnDTVWARNING: All channel settings and user preferences will belost and returned to the factory defaults. It is recommendedthat a reset is performed only when serious problems areexperienced.ResetReturnDTV