English - 72How to assemble the Stand-Base (depending on the model)Using the 6 screws for securing the stand base and themonitor, firmly attach the monitor to the stand base.(The exterior of the set may be different than the picture.)In case of installing your TV on the wall,close the cover (1) on the stand-baseconnection part using two screws forhiding.WarningFirmly secure the stand to the TVbefore moving it, as the stand mayfall and could cause serious injury.¯Two or more people should carrythe TV. Never lay the TV on thefloor because of possible damageto the screen.Always store the TV upright.Moving to the remembered position1 Complete Step 1 of Entering the menu.2 Pressing a Color (Red, Green, Yellow) button moves the auto wallmount to the saved position.¯ You can move the wall mount to one of the 3 pre-set positionsby pressing the Red (Position 1), Green (Position 2) or Yellow(Position 3) buttons.¯ If you adjust the positon after moving to a pre-set position, theposition display will disappear.¯ For installation, refer to the Installation Manual provided with the wallmount.¯ For product installation and the installation and moving of the wall mount, make sure to consult a specializedinstallation company.¯ This installation manual is to be used when attaching the wall mount to a wall. When attaching to other buildingmaterials, please contact your nearest dealer.¯ The auto wall mount will not work when Anynet+ or WISELINK is operating.Wall-Mount AdjustmentAdjust Save Center► ►► ►► ►► ►321PositionPosition 1Preparing before installing Wall- Mount on the wall1 Install Wall Mount with the torque range of 15kgf·cm or less. Make sure that parts can be damaged ifthe torque is out of the specified range.2 Accessory Kit contains Holder–Ring [①] for installing other company’s Wall-Mount on Samsung TV.(Case B)1Case A. Installing SAMSUNG Wall-Mount Case B. Installing other company’s Wall-Mount
