Samsung PS50A756T1M User Manual

Also see for PS-50A756: User manual

Contents

English - 63Auto Wall-Mount Adjustment (Sold separately) (Depending on the model)Once the auto wall mount is installed, your TV’s position can be easily adjusted.Entering the menu1. Press the ▲, ▼, ◄ or ► button on your remote control.The Wall Mount Adjustment screen is displayed.If the Auto Wall-Mount screen is not displayed when clicking on a directionbutton while watching your TV, use the menu to display that screen.Press the MENU button to display the menu. Press the ▲ or ▼ button toselect Setup, then press the ENTERE button.Press the ▲ or ▼ button to select Wall-Mount Adjustment, then pressthe ENTERE button.Remembering the Position2. Adjust to the desired position using the ▲,▼,◄,► buttons.If you press an arrow button when no OSD is displayed on the TV screen,the Adjustment screen appears.Press the INFO button to reset. Press the ◄ or ► button to select Yes,then press the ENTERE button. The position is initialized to the defaultsetting.3. Press the blue button. Press the ▲ and ▼ buttons to select a save mode fromeither Position 1, Position 2 or Position 3 in order to save the current position.To not save the current position, press the RETURN button.When selecting a save mode, you cannot use the Colour buttons.4. Press the ENTERE button to save.When Position1 is selected, the message Current position saved as Position1 is displayed.5. Press the ENTERE button.The saved Position appears on the left side of the OSD.Moving to the remembered position1. Complete Step 1 of Entering the menu.2. Pressing a Colour (Red, Green, Yellow) button moves the auto wall mount to thesaved position.You can move the wall mount to one of the 3 pre-set positions by pressingthe Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.If you adjust the Position after moving to a pre-set position, the positiondisplay will disappear.For installation, refer to the Installation Manual provided with the wall mount.For product installation and the installation and moving of the wall mount, make sure to consult a specialized installationcompany.This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials,please contact your nearest dealer.The auto wall mount will not work when Anynet+ or WISELINK Pro is operating.NN--NNNONNNNNNNNSetupDigital Text : EnableLight Effect : Watching TVWall-Mount Adjustment ►Melody : OffEntertainment : OffEnergy Saving : OffPIPSoftware UpgradeCommon InterfaceWall-Mount AdjustmentPosition 1 2 3Adjust Save CentreSaveSelect a mode to save.Move Enter ReturnPosition1Position2Position3Serial Cable(1P to 1P)(Not supplied)Rear Panel Auto Wall-Mount