Samsung PS50C580G1K User Manual

10 EnglishConnectionsChanging the Input SourceSource ListUse to select TV or other external inputsources such as DVD / Blu-ray players /cable box / satellite receivers (Set-Top Box)connected to the TV.■ TV / Ext. / AV / Component / PC/ HDMI1/DVI / HDMI2 / HDMI3 /HDMI4 / USB✎ In the Source List, connectedinputs will be highlighted.✎ Ext. and PC always stay activated.Edit Name■ VCR / DVD / Cable STB / Satellite STB / PVR STB /AV Receiver / Game / Camcorder / PC / DVI PC /DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:Name the device connected to the input jacks to makeyour input source selection easier.✎ When a PC with a resolution of 1920 x 1080 @60Hz is connected to the HDMI IN 1(DVI) port,you should set to DVI PC mode under Edit Name.✎ When connecting an HDMI/DVI cable to theHDMI IN 1(DVI) port, you should set to DVI PC orDVI Devices mode under Edit Name.✎ If an HDMI cable is connected to theHDMI IN 1(DVI) port, the audio may not work.In this case, connect to the PC/DVI AUDIO INport.CONNECTIONS COMMON INTERFACE SlotTo watch paid channels, the “CI or CI+ CARD” must be inserted.y If you don’t insert the “CI or CI+ CARD”, some channels willdisplay the message “Scrambled Signal”.y The pairing information containing a telephone number, the “CI orCI+ CARD” ID the Host ID and other information will be displayedin about 2~3 minutes. If an error message is displayed, pleasecontact your service provider.y When the configuration of channel information has finished, themessage “Updating Completed” is displayed, indicating thechannel list is updated.– Depending on the model, a message requesting your ParentalLock password may appear when the CI or CI+ CARD isreinserted.– Depending on the model, even if the Parental Lock is set toAllow All a message requesting your password may appear foradult(18 years and above) programmes.✎ NOTEx You must obtain a “CI or CI+ CARD” from a local cable service provider.x When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” maycause damage to it.x Insert the “CI or CI+ CARD” in the direction marked on the card.x The location of the COMMON INTERFACE slot may be different depending on the model.x “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.x If you have any problems, please contact a service provider.x Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not beseen.SOURCE