¦ Installing the Stand✎ Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models(Depending on the model)Step 1. Attach your PDP TV to the stand.✎ Two or more people should carry the TV.✎ Make sure to distinguish between the front and back of the stand when assembling them.✎ To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upperleft of right sides of the TV.Step 2. Fasten two screws at position 1 and then fasten three screw at position 2.✎ Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean toone side.¦ Using the remote control buttons¦ Installing Batteries in the Remote Control✎ NOTEx Use the remote control within 23 feet from the TV.x Bright light may affect the performance of the remote control. Avoidusing nearby special fluorescent light or neon signs.x The colour and shape may vary depending on the model.English - 2RETURN ButtonReturn to the previous menu.ENTERE / DIRECTION ButtonsMove the cursor and select anitem. Select the currently selecteditem. Confirm the setting.EXITExit the on-screen menu.MENU ButtonDisplay the main on-screen menu.GUIDETOOLSPOWERSOURCEON/OFFMENURETURNMEDIA.PCONTENTAD P.SIZE SUBT.INTERNET@TVA B C D3DEXITINFOCH LISTTTX/MIX PRE-CH4321sssss12Preset Step 1 Step 2s ssssRearFronts s ssssTop View