Samsung Q Series Full Manual

Also see for HW-Q600C: User manual Full manual Full manual Manual

ENG - 10WOOFERTONECONTROLCH LEVELCH LEVELBy pressing the button, you can adjust the volume of the each speaker.• Press the button to select CENTER LEVEL or TOP LEVEL and then adjust the volumebetween -6~+6 by using the Up/Down buttons.• If the Rear Speakers (sold separately) are connected, the setting REAR LEVEL issupported. To adjust the volume of the REAR LEVEL between -6 to +6 by using the Up/Down buttons.SOUNDMODEWOOFERTONECONTROLCH LEVELSound ControlBy pressing the button, you can set the audio function. The desired settings can beadjusted using the Up/Down buttons.VOICE ENHANCE ON/OFF  NIGHT MODE ON/OFF  SYNC  VIRTUAL ON/OFF– VOICE ENHANCE ON/OFFThis mode is makes it easier to hear spoken dialog in movies and TV.– NIGHT MODE ON/OFFThis mode is optimized for nighttime viewing with the settings adjusted to bring thevolume down but keep the dialog clear.– SYNCIf the video on the TV and audio from the Soundbar are not synchronized, press the(Sound Control) button to select SYNC and then set the audio delay between0~300 milliseconds by using the Up/Down buttons. (Not available in “USB” or “BT”mode.)– VIRTUAL ON/OFFDolby Virtual function can be turned ON/OFF.• The VOICE ENHANCE, NIGHT MODE, and VIRTUAL audio function can be turned ON/OFF by using the Up/Down buttons. (VIRTUAL function is not available in “USB” or “BT”mode.)• Press and hold the (Sound Control) button for about 5 seconds to adjust the soundfor each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz areselectable using the Left/Right buttons and each can be adjusted to a setting between-6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to “STANDARD”.)SOUNDMODEWOOFERTONEBluetoothPAIRSwitch the Soundbar to Bluetooth pairing mode.Press the PAIR button and wait for the “BT PAIRING” screen to connect to a newBluetooth device.Play / PauseVOL WOOFERSOUNDMODEPAIRYou can also play or pause music by pressing the button.