Questions and Answers 128Sound RelatedQ1 How to install and uninstall the sound driverA To install or uninstall the sound driver from this system, please follow the procedures below.• Sound Driver ComponentsThe sound driver consists of the following 3 components. The components are automaticallyinstalled during the installation.- High Definition Audio - KB888111: Microsoft UAA Bus Driver for High Definition Audio- SoundMAX: SoundMAX Integrated Digital HD Audio- WOW XT and TSXT Filter Driver: SRS• Uninstalling the Sound DriverTo remove the sound driver due to a problem or for an update, follow the procedures below.If you do not follow the sequence below, the sound driver may not be removed or the rein-stalled driver, or may not work properly.z Select Start > Control Panel > Add or Remove Programs.x Remove WOW XT and TSXT Filter Driver first.c Remove SoundMAX and restart the computer.• Reinstalling the Sound DriverIf there is an already installed sound driver, uninstall the driver according to the proceduresabove.The sound driver is included on the System Software Media.z Connect the external USB ODD and insert the System Software Media into the ODD.x Select the Sound Driver on either Standard Installation or Custom Installation, then the 3components of the sound driver are automatically installed.Q2 How can I use an additional function when making a recording using the micro-phone?A To use an addition function so as to record sound by emphasizing the sound between the twomicrophones, configure the settings as follows.z Click Start > Control Panel > Sound, Speech and Audio Devices > SoundMAX.x In the Microphone Peripherals, select 'Directional Beam' and click the OK button.