Preventing the TV from falling1. Using the appropriate screws, firmly fasten a set ofbrackets to the wall. Confirm that the screws are firmlyattached to the wall.– You may need additional material such as wall anchorsdepending on the type of wall.2. Using the appropriately sized screws, firmly fasten a set ofbrackets to the TV.– For the screw specifications, refer to "Standard Screw"in the table on the previous page.3. Connect the brackets fixed to the TV and the bracketsfixed to the wall with a durable, heavy-duty string, andthen tie the string tightly.– Install the TV near the wall so that it does not fallbackwards.– Connect the string so that the brackets fixed to the wallare at the same height as or lower than the bracketsfixed to the TV.Detaching the Clean back stand cover from the TVRefer to the following figure to detach the stand cover:English - 15