891 Select the Boot menu in the BIOS Setup.2 Press <Enter> on the Boot Device Priority item.3 Press the down key (↓) to move to the AHCI HDDitemand press the F6 key to move up to the top item.4 Press the F10 key to save the settings and exitSetup. The highest boot priority device is now set tothe Hard Drive.Changing the Boot PriorityBy default, the highest boot priority device is set to the CD-ROM/DVD drive. As an example, the procedures tochange the highest boot priority device to the hard disk drive are described below.XXXXXXXX► [Type A Model]► [Type B Model]Boot Device Priority[Set Boot Priority]1. IDE CD : xxx2. IDE HDD : xxx3. USB KEY : N/A4. USB HDD : N/A5. USB FDD : N/A6. USB CD : N/A7. NETWORK : B06 D00 Yukon PXEBoot Device Priority[Boot priority order]1. AHCI CD : N/A2. AHCI HDD : XXXXXXXXXXXXXXXX3. USB KEY : N/A4. USB CD : XXXXXXXXXXXXXX5. USB FDD : N/A6. USB HDD : N/A7. PCI BEV : N/A8.- IDE HDD : N/A- IDE CD : N/A- PCI SCSI : N/A- USB ZIP : N/A- USB LS120 : N/A[Excluded from boot order]Bremen_R530_V7_eng.indb 89 2011-04-27 오후 5:29